Volcanic edifice stability during cryptodome intrusion     

Franck Donnadieu  Olivier Merle  Jean-Claude Besson 《Bulletin of Volcanology》2001,63(1):61-72

Limit equilibrium analyses were applied to the 1980 Mount St. Helens and 1956 Bezymianny failures in order to examine the influence on stability of structural deformation produced by cryptodome emplacement. Weakening structures associated with the cryptodome include outward-dipping normal faults bounding a summit graben and a flat shear zone at the base of the bulged flank generated by lateral push of the magma. Together with the head of the magmatic body itself, these structures serve directly to localize failure along a critical surface with low stability deep within the interior of the edifice. This critical surface, with the safety coefficient reduced by 25-30%, is then very sensitive to stability condition variation, in particular to the pore-pressure ratio (r_u) and seismicity coefficient (n). For r_u=0.3, or n=0.2, the deep surface suffers catastrophic failure, removing a large volume of the edifice flank. In the case of Mount St. Helens, failure occurred within a material with angle of friction ~40°, cohesion in the range 10⁵-10⁶ Pa, and probably significant water pore pressure. On 18 May 1980, detachment of slide block I occurred along a newly formed rupture surface passing through the crest of the bulge. Although sliding of block I may have been helped by the basal shear zone, significant pore pressure and a triggering earthquake were required (r_u=0.3 and n=0.2). Detachment of the second block was guided by the summit normal fault, the front of the cryptodome, and the basal shear zone. This occurred along a deep critical surface, which was on the verge of failure even before the 18 May 1980 earthquake. The stability of equivalent surfaces at Bezymianny Volcano appears significantly higher. Thus, although magma had already reached the surface, weaker materials, or higher pore pressure and/or seismic conditions were probably required to reach the rupture threshold. From our analysis, we find that deep-seated sector collapses formed by removing the edifice summit cannot generally result from a single slide. Cryptodome-induced deformation does, however, provide a deep potential slip surface. As previously thought, it may assist deep-seated sector collapse because it favors multiple retrogressive slides. This leads to explosive depressurization of the magmatic and hydrothermal systems, which undermines the edifice summit and produces secondary collapses and explosive blasts.  相似文献   

Constraints in 3D gravity inversion   总被引：5，自引：0，他引：5  

Olivier Boulanger  Michel Chouteau† 《Geophysical Prospecting》2001,49(2):265-280

A three-dimensional (3D) inversion program is developed to interpret gravity data using a selection of constraints. This selection includes minimum distance, flatness, smoothness and compactness constraints, which can be combined using a Lagrangian formulation. A multigrid technique is also implemented to resolve separately large and short gravity wavelengths. The subsurface in the survey area is divided into rectangular prismatic blocks and the problem is solved by calculating the model parameters, i.e. the densities of each block. Weights are given to each block depending on depth, a priori information on density and the density range allowed for the region under investigation. The present computer code is tested on modelled data for a dipping dike and multiple bodies. Results combining different constraints and a weight depending on depth are shown for the dipping dike. The advantages and behaviour of each method are compared in the 3D reconstruction. Recovery of geometry (depth, size) and density distribution of the original model is dependent on the set of constraints used. From experimentation, the best combination of constraints for multiple bodies seems to be flatness and a minimum volume for the multiple bodies. The inversion method is tested on real gravity data from the Rouyn-Noranda (Quebec) mining camp. The 3D inversion model for the first 10 km is in agreement with the known major lithological contacts at the surface; it enables the determination of the geometry of plutons and intrusive rocks at depth.  相似文献   

Strain partitioning in a pluton during emplacement in transpressional regime: the example of the Néouvielle granite (Pyrenees)     

G. Gleizes  D. Leblanc  P. Olivier  J. Bouchez 《International Journal of Earth Sciences》2001,90(2):325-340

This microstructural and anisotropy of magnetic susceptibility study of the internal structures of the Hercynian Néouvielle granite pluton (100 km²) provides new data indicating that the pluton was emplaced during the main Hercynian tectonic event recognized in the Pyrenees. It also provides new data about the later Alpine deformation localized along narrow mylonitic bands. These bands acted as reverse faults and have not rotated the Hercynian structures that define the main part of the pluton. The pluton is composed of two structural domains: the northern half of the pluton displays a beak shape in map view, with subhorizontal E-W trending lineations of magmatic origin; the southern half is semi-circular and displays rather steeply northward plunging lineations corresponding to magmatic and high temperature (HT) solid-state microstructures. These features are associated with magma deformation during emplacement. Magma deformation corresponds, in the northern half of the pluton, to an E-W strike-slip deformation recognized in the enveloping pelitic metasediments of Carboniferous age and, in the southern half of the pluton, to southward overthrusting recognized in the enveloping quartzites of Devonian age. Juxtaposition in a single granite body of transcurrent and compressive domains is viewed as a strain partitioning in the magma. This strain partitioning is linked to both the transpressive character of the main regional deformation event and the rheological contrast between the pelitic country rocks and quartzose country rocks.  相似文献   

Evaluation of Pb-Pb and U-Pb Laser Ablation ICP-MSZircon Dating using Matrix-Matched Calibration Sampleswith a Frequency Quadrupled (266 nm)Nd-YAG Laser     

Olivier Bruguier  Philippe Télouk  Alain Cocherie  Anne-Marie Fouillac  Francis Albarède 《Geostandards and Geoanalytical Research》2001,25(2-3):361-373

  相似文献   

Improvement of the transformation between ITRF and Doppler-Realized WGS84     

Patrick Sillard  Claude Boucher 《Journal of Geodesy》1996,70(11):768-780

The WGS84 (World Geodetic System 1984) reference system is, originally, mathematically defined from the NSWC-9Z2 (Naval Surface Weapons Center — 9Z2) reference system. The WGS84 associated realization, called in this paper WGS84-D, is a 1 meter consistency NNSS (US Navy Navigation Satellite System) Doppler realized reference frame. In contrast, the ITRF (IERS Terrestrial Reference Frame) is a 1 centimeter consistency reference frame realized through the most accurate techniques of Space Geodesy. This work intends to improve the transformation parameters between the WGS84-D and the ITRF through the use of both a NSWC-9Z2/Doppler realization and an extension of the ITRF network. A strong linear correlation was also modeled between the Doppler determined scale factor and the mean smoothed sunspot number, due to uncompensated ionospheric effects. This correction improved NSWC-9Z2 (i.e. WGS84) Doppler realization consistency. The uncertainty of adjusted transformation parameters between the ITRF and the WGS84-D is improved by a factor 2 over previous determinations.  相似文献   

Empirical relationships between diversity of invertebrate communities and altitude in rivers: Application to biomonitoring     

Claude Lang  Olivier Reymond 《Aquatic Sciences - Research Across Boundaries》1993,55(3):188-196

The relationships between the diversity of invertebrate communities and the altitude of sampling sites were analysed in 438 benthic samples, collected between 1982 and 1991, in 56 rivers of western Switzerland. Diversity, estimated from total number of taxa (genus or family) and from number of taxa intolerant of pollution, was positively correlated with increasing altitude. In contrast, density of human population and the level of organic pollution were negatively correlated with increasing altitude. Therefore, the upstream increase of invertebrate diversity was attributed to the decrease of human population which is the main source of organic pollution. In this study, altitude was used, instead of organic pollution, to predict diversity. Empirical relationships between diversity and altitude were applied to surveys of water quality to describe the general altitudinal pattern characteristic for each region and to single out anomalous sites and rivers. In addition, changes in the altitudinal patterns of diversity can be used to monitor the recovery of rivers from pollution.  相似文献   

WHAT SHOULD A HYDROGEOLOGIST BE AT THE DAWN OF THE 21ST CENTURY?     

Olivier Banton  Moumtaz Razack 《Ground water》1993,31(6):882-883

  相似文献   

Environmental controls on clay mineralogy of an Early Jurassic mudrock (Blue Lias Formation,southern England)     

Jean-Fran?ois?DeconinckEmail author  Stephen?P.?Hesselbo  Nicolas?Debuisser  Olivier?Averbuch  Fran?ois?Baudin  Julian?Bessa 《International Journal of Earth Sciences》2003,92(2):255-266

We present a dataset including clay mineralogy, gamma-ray spectrometry, organic matter content and magnetic susceptibility of the Hettangian to lowest Sinemurian successions of Dorset and Somerset, southern UK (Blue Lias Formation, Bristol Channel and Wessex basins). In both areas, the clay assemblages comprise predominantly detrital illite, kaolinite and illite/smectite mixed layers. Clays probably originated from the erosion of the Hercynian massifs, the relative proportions of kaolinite and illite being modulated by arid-humid climatic fluctuations. The organic matter (OM) content (types II to IV) ranges up to 12% in both areas. A clear stratigraphical trend in clay mineral assemblages is apparent in Somerset, whereas in Dorset sharp contrasts between adjacent horizons and a greater dilution by carbonate mask the long-term evolution. Correlations between both areas based on similar vertical trends in clay mineral abundance support the suggestion of a hiatus within the angulata Zone of the Dorset succession. As expected, the kaolinite/illite ratio correlates with the Th/K ratio deduced from gamma-ray spectrometry. However, significant departures from the correlation occur in OM-rich intervals, suggesting that Th may be partly adsorbed on to OM particles. Surprisingly, high magnetic susceptibility correlates with abundant kaolinite, not with Fe-rich clays, indicating either that kaolinite is accompanied by a soil-inherited magnetisable phase (possibly iron oxide) or that illite-rich rocks are more strongly diluted by carbonate than are kaolinite-rich strata.  相似文献   

The use of transplanted cultured tropical oysters (Saccostrea commercialis) to monitor Cd levels in North Queensland coastal waters (Australia)     

Olivier F  Ridd M  Klumpp D 《Marine pollution bulletin》2002,44(10):1051-1062

Bivalves are commonly used to detect metal pollution in the marine environment. Commercially cultured Milky oysters (Saccostrea commercialis) were transplanted in various sites along the North Queensland coast and analyzed for two metals of potentially anthropogenic origin (Cd, Zn). To provide additional information, naturally occurring Black Lip oysters (Saccostrea echinata) were also collected at the transplantation sites. The study demonstrated that the oysters species transplanted are good bioindicators of these metal concentrations in tropical waters, sensitive to variations in the environment at concentrations which are much smaller than pollution signals commonly reported for temperate waters. Three transplant experiments were carried out from May 1999 to February 2000. Milky oysters transplanted to offshore areas (Orpheus Is., Kelso Reef) accumulated Cd in the soft parts whereas oysters sampled from cages placed in Ross Creek and the Herbert River estuaries showed a decrease in Cd concentration, which resulted from an increase in dry weight. Dry weight appeared to be an important covariant affecting Cd concentration in the oysters whereas it does not unambiguously affect Zn concentrations. For the duration of the experiments, oysters sampled from the Magnetic Is. reference site showed effectively constant Cd concentrations and total Cd contents which indicates that any seasonal cycle affecting metal concentration is weak. It was found that Cd accumulation in oysters increased as ambient dissolved Cd concentration decreased, from which it was concluded that for these oysters, the predominant source of Cd was from the particulate phase rather than the dissolved phase.  相似文献   

DORIS Contribution to ITRF2005     

Z. Altamimi  X. Collilieux  C. Boucher 《Journal of Geodesy》2006,80(8-11):625-635

We examine the contribution of the Doppler Orbit determination and Radiopositioning Integrated by Satellite (DORIS) technique to the International Terrestrial Reference Frame (ITRF2005) by evaluating the quality of the submitted solutions as well as that of the frame parameters, especially the origin and the scale. Unlike the previous versions of the ITRF, ITRF2005 is constructed with input data in the form of time-series of station positions (weekly for satellite techniques and daily for VLBI) and daily Earth orientation parameters (EOPs), including full variance–covariance information. Analysis of the DORIS station positions’ time-series indicates an internal precision reaching 15 mm or better, at a weekly sampling. A cumulative solution using 12 years of weekly time-series was obtained and compared to a similar International GNSS Service (IGS) GPS solution (at 37 co-located sites) yielding a weighted root mean scatter (WRMS) of the order of 8 mm in position (at the epoch of minimum variance) and about 2.5 mm/year in velocity. The quality of this cumulative solution resulting from the combination of two individual DORIS solutions is better than any individual solution. A quality assessment of polar motion embedded in the contributed DORIS solutions is performed by comparison with the results of other space-geodetic techniques and in particular GPS. The inferred WRMS of polar motion varies significantly from one DORIS solution to another and is between 0.5 and 2 mas, depending on the strategy used and in particular estimating or not polar motion rate by the analysis centers. This particular aspect certainly needs more investigation by the DORIS Analysis Centers.  相似文献